SOS bracelet BodyGuard S ONE - 4G

BodyGuard features:

■ SOS Call, Vibration.
■ After pressing the SOS button (for 5 seconds), the bracelet calls up to 3 SOS contacts of your choice. If it doesn't call the first contact, it calls the other listed contacts in the order you specified. Persons connect by phone and can talk to each other.
■ Fall down detector (possibility of setting fall sensitivity). If a person with the watch falls, the device will automatically call SOS contacts and you will also receive a notification in the application.
■ In case of a failed call, it also sends an emergency notification to the application. Of course, all SOS contacts have a missed call.
■ Automatic answer function after several rings.
■ A more powerful GPS sensor enables orientation tracking of the bracelet wearer's position on a smartphone or tablet with greater accuracy. GPS signal with accuracy in the outdoor environment in the order of meters, inside buildings where there is no GPS signal with a Wi-Fi signal the accuracy is in the order of units to tens of meters, in indoor areas without Wi-Fi there can be deviations from 200 m to several km (so-called .LBS). More about location detection can be found in the FAQ.
■ 4G network for more accurate localization. In case of unavailability, the device will use the 2G network.
■ Monitoring of indicative health values: heart rate / blood pressure / blood oxygen / body temperature.
■ Option to set a safe zone. You will receive a notification after leaving it.
■ Medication warnings.
■ Warning when the device is removed from the hand. Runs every 10 minutes. *Note: In the application, you can only deactivate notifications to the application. SMS notifications that go to the SOS contact. No. 1 can only be deactivated by not setting SOS contact No. 1, but SOS contact No. 1 will only be set to the second position.
■ Rejection of unknown calls - set calls only from saved contacts.
■ Remote listening. You can use it in case you cannot call and you are worried.
■ Alarm clock, pedometer, calorie and sleep tracking.
■ Low battery warning.
■ Remote shutdown or restart option.

Ask us anytime for details around the device features. We will be happy to explain everything to you. We have many years of experience with various SOS devices.

All BodyGuard 4G GPS tracker watches and wristbands should be charged with a standard 5V/1A charger, which we also provide in the package.

Otherwise, there is a risk of system sleep due to battery protection, and this system sleep may be irreversible.

Waterproof:

Regarding waterproofing, we inform you that the watch has waterproofing according to the IP67 standard or another according to the description of the specific product.IP67 means it can last 30 minutes at a depth of 1 meter, but only in still water without movement. They are suitable for common situations such as hand washing or showering, but should not be submerged for long periods of time. It is important that the SIM card slot is well inserted so that water does not get inside. It is not recommended to swim, jump into the water or make sudden movements in the water with them, as the water pressure can damage the microphone and speaker, or affect the sound quality.

Device location detection:

The location is determined as a guidance only.Location detection is always limited by the signal and the size of the receivers in the device. It should be noted that the size of the device is designed to be carried on the hand, and a large part of the device can accommodate the battery. So receivers are generally weaker than in phones. This is a physical property of the device and not a device defect. In the application, it is always indicated on the map how the position is determined at the given moment. These are:

• GPS - primarily using GPS - the most accurate, on the order of meters, in an outdoor environment.
• Wifi- outside the range of GPS, in closed spaces (buildings, shadows of large buildings) without the help of nearby Wifi - with an error from units to hundreds of meters.
• LBS- out of reach of GPS and Wifi, in closed spaces without Wifi signal using mobile operators' transmitters - with an error from 200m to several km. This positioning can be turned off so that it does not scare you unnecessarily in the event of a deviation of a few kilometers.
• If you wear the bracelet on your hand and move around with it, there is a high probability that even in buildings you will capture the exact location at least via the Wifi network if there is no GPS signal available.
• If the bracelet wearer's position seems suspicious for an extended period of time, call the bracelet and verify that everything is fine.

Measurement of health values:

Please note that the detected health values ​​such as heart rate, blood pressure, etc. are indicative only and do not replace the detection of health values ​​by certified medical devices.You can find more about measuring health values ​​in the FAQ tab.

Technical parameters of the BodyGuard:

■ RT system
■ RAM + ROM: 128MB+196MB
■ Battery life: 4-7 days, Li-on type 800mAh (same as in smart phones)
■ Charging: Via magnetic connector. About 30-60 minutes.
■ Waterproof: IP67 up to 1 m (after 30 min) with the bracelet DO NOT SWIM
■ Resistance: IP67 against sand and dust
■ Dimensions: 45 mm x 37 mm x 15 mm
■ Weight: 51g
■ Strap: 100% silicone

Modern design and quality materials used.

See the link below for the most frequently asked questions and answers common to all BodyGuard devices.

FAQ

First setup (connecting the device to the app):

TEST YOUR SIM CARD ON YOUR PHONE FIRST TO MAKE SURE IT'S WORKING. Especially the internet connection without wi-fi on.

• Insert the SIM and turn on the device by long pressing the SOS button until you hear the melody.

• Download the app (see the APPS tab for recommended apps).
• Click on Register.
• Create an account and register.
• The first step in the app will prompt you to pair your device.
• Scan the QR code on the device or inside the device under MORE (just click on the square at the end of the first line and it will open the camera to scan the QR code).
• Select the device name.
• Select a role (e.g. son, father, etc.).
• Enter the phone number of the Sim card in the device (optional only).
• Confirm.
• The application environment opens, where you set up everything you need (SOS contacts, etc.).

Wristband removal detector. *Note: In the application, you can only deactivate notifications to the application. SMS notifications that go to the SOS contact. No. 1 can only be deactivated by not setting SOS contact No. 1, but SOS contact No. 1 will only be set to the second position.

We will be happy to explain everything about the device.

info@bodyid.com

+420 775 677 103

Tomas is a GPS expert and will be happy to discuss everything with you.

SIM card:

Any operator's SIM card can be used. The SIM size is Nano (the smallest).

• The average data consumption of the device is about 50-100 MB per month.
• Make sure the SIM card is fully compatible with the 4G network.
• On the SIM card, have free minutes to call as needed.
• We also recommend a certain supply of sms for possible notification sms (low battery, SOS call position, etc.).

Warning: If no data plan is active or there is not enough money on your prepaid card, the device will quickly discharge when you try to establish the connection again. Location and communication services are not available.

Only insert an active and functional SIM card.

We always recommend that you test the full functionality of your phone first: internet without Wifi, calls, sms.

Aplication Beesure GPS

or

Aplication SeTracker2

Download on Google Play (Android) and App Store (iPhone).

Take a look at some of the basic features of the app

Basic functions

Please scan the QR code with your phone camera and open the link.